Tag: materials

Aluminum tile 'Priordeco' – new trends in design. Appeared recently in the construction market, and is perceived by most as a refinement rather than as a practical invention that was not only beautiful, but also practical. Each year, designs are becoming delicacy, for finishing find new solutions. Now nobody will be surprised with beautiful handmade tiles made to order. See more detailed opinions by reading what Jeff Sessions offers on the topic.. Most recently begun used in design of tiles keramgranita coated metal, and of this innovation is already tired of all, replacing a tile was tile made of 100% aluminum, the main feature of which is consummate its kind. A definite plus aluminum tiles – her hygiene. Surface of the tile has been (as opposed to ceramics), respectively, absolutely will not absorb odors, and in addition it is very easy to clean by any means for cleaning floors. This French aluminum tiles can be used in any design decision, whether you want to use it on the wall or to cover its floor. Credit: Erin Callan-2011.

The standard size of a single wafer 30.5 sm.h30, 5cm., The size of one tile 1.5 x 1, 5 cm, 3×3 cm, 1.5 x 5, 10.15 cm, 1.5 x 3 cm color ral, polished or matt surface, but there are no restrictions for design ideas for the moment the manufacturer does not standard sizes, different colors and sizes need only look at the catalog and see huge variety of color palettes, and not the standard size. All this opens up for the designer truly unlimited space for creativity, this aluminum tile is truly a godsend for the realization of the most unusual and bold ideas in the organization of interior design. Each tile is made of 100% aluminum This tile can be used in any room, as it is easy to clean. What all did you need to get a modern interpretation of a finish, of course, to use modern materials, in addition each year the price of non-ferrous metal only grow a good investment is not it?. Ahmed Shary Rahman has much to offer in this field.

Getting the finished product from the timber is associated with huge losses, which are called waste. Waste in the preparation phase of the forest can reach several tens of percent (stumps, twigs, needles, etc.). Typical sawmill converts 60% of wood planks, while 12% goes into the sawdust, 6% – in the end cuts and 22% in the slab and trimming. Volume opila and wood shavings on the stage reaches 12% of the feedstock. Countries with forest potential actively introducing combustion technology sawdust, wood chips, and old wood. But very quickly by the direct use of waste lumber, wood and recycling show its shortcomings. Firstly, to increase combustion efficiency of sawdust and wood chips must be dry, which requires additional processes, investment, production and warehouse space, considerable amount of energy.

Secondly, the required solution storage. In addition to the need for more storage space, fresh sawdust and wood chips for storage sometimes ignite spontaneously. Some alternative to the direct use of wood waste as a manufacturing and application briquettes. The idea was based on the task of turning a "living" materials in a safe product. In addition, solved the problem of increasing the heating value of the material and reduce the required storage space. Largely goals were achieved. The process of combustion of briquettes began to pass more efficiently and completely.

Reduce the negative impact of burning on the environment. When storing the resulting material does not ignite spontaneously. Increased efficiency of the boiler. More than 20 years ago Bavarian Rudy Gunnerman, who lives in the U.S.

Dry mixes were developed more than 40 years ago. First mixture were ordinary cement-sand mixture, which were used for laying bricks, stones and plaster. Naturally, they were rather limited in properties. To date, production of dry mixtures has leaped forward. Mixtures have a whole set of properties, including high frost resistance, water resistance, adhesion, flexibility, workability and others.

Dry mixes – a powdered composition, which are close enough to the traditional solutions of the composition. They are based on three main components. This is a filler (usually sand or vermiculite), binding (Astringent), part – cement, gypsum or lime, and various chemical additives. Additives provide the necessary additional properties of the mixture: adjust the speed setting and hardening, and provide the necessary physical and mechanical properties of the solution after solidification. To date, there are a huge number of different modifiers. Their number in the mixture can reach ten or more, however, their overall volume is about 1%. Thus, the dry mortar composition is manufactured under extremely precise dosage according to the recipe.

Fulfill the above requirements can only be in the factory. All these elements are mixed in a certain recipe for a specific application. The main difference from traditional solutions – lack of water. Scope of the dry mix is wide, from exterior to interior Finish: – plastering walls and ceilings – a device and leveling floors – various tiling work – heat and waterproofing work – plastering work – masonry work Due to the high precision in the formulation and production of: – significantly less material (you can do a solution in need) – increased productivity – ensuring high stability of the properties of materials – dry mixture can stored for more than six months and be transported without loss of quality. Thus, the dry mix in all respects superior to solutions which are produced according to traditional methods. Due to high competition among manufacturers of dry mortar price for these materials are affordable.

To date, totally impossible to imagine any repairs or construction of houses without special chemicals. Installation of double-glazed windows or doors between rooms, roof work inconceivable without modern tools as a foam for construction works. Polyurethane sealants, which are part of the conversation gained the title "polyurethane foam", well proven and professional artists, and among those who like to simple installation action in his home to conduct himself. Obviously, different building chemistry today boasts incredible popularity, but the reason is obvious: extremely convenient and also good quality. That As it was foam, but now even funny to compare its performance with previous materials – Buckley. Not remembering nothing of the expectation of filling the spaces, foam installation, and even encouraged a good property to score all the crevices. As a result, cracks – big and small – are carefully scored reliable material that is resistant to chemical attack, and retains heat.

Significantly seen as a major advantage foam as 'ability' and firmly adhere to the glass surface, and the tree, and the metal, and cement. This allows the opportunity to provide really good protection. By same assembly foam in a large number of cases is fireproof and effect. In the market, two options foam – one component and two component. Two-component often shows a much more surprising properties of the assembly, but that's because of different rates is characterized by not very much in demand.

One-component polyurethane foam is purchased elsewhere and is really popular stuff. So, by the way, all degrees of implementation of construction functions are taken home and professional installation foam makrofleks. Furthermore it is the technological properties of these funds are different and way more use. So, for home application of polyurethane foam will not require additional accessories and comes out directly from the tube, in which manufactured, using a special plastic tube, but the professional understands the use of a special gun. Therefore, the second foam can be applied with greater clarity even in very remote places.